Vossloh system

Materials:: spring steel, carbon steel, PA66, HDPE, etc.

Standard:: ISO, UIC,EN,AS,etc.

Grade:: 4.6 5.6 8.8,etc

Surface:: painting, black, plain, HDG,etc.

Moq:: 5000pcs

product description

Part name	Technique parameter	Technical requirement	Remark
SKL14 clip	Type	Dia.13mm	Application for different rail type
	Material	60Si2CrA	Chemical composition(%): C:0.56-0.64, Mn:0.40-0.70, Si:1.40-1.80,Cr:0.70-1.00 P:≤0.03, S:≤0.03
	Material	38Si7	Chemical composition(%): C:0.35-0.42, Mn:0.50-0.80, Si:1.50-1.80, P:≤0.03, S:≤0.03
	Finish	Plain oiled, color painting, or the other required by customers	Offered as ordered
	Hardness	42-47HRC
	Fatigue life	when clip spring deflection is 9.1mm, swing is 1.42mm, fatigue life is up to 5 millions cycles without breaking.
	Standard refers to	DIN17221, GB/T1222
Ss35 screw spike	Type	M24xL, L: 150-240mm
	Material	Grade 4.6: Q235	Tensile strength: ≥400Mpa Yield strength:≥240Mpa Elongation:≥22% Cold bending: 90 degree without crack
		Grade 5.6: 35#	Tensile strength: ≥500Mpa Yield strength:≥300Mpa Elongation:≥20% Cold bending: 90 degree without crack
		Grade 8.8: 45#	Tensile strength: ≥800Mpa Yield strength:≥640Mpa Elongation:≥12% Cold bending: 90 degree without crack
	Finish	Plain oiled, Oxide black, Zinc plated, Hot dip galvanized, Dacromet, Sherardizing
	Standard refers to	ISO898-1, UIC864-1, and NF F500-50
Plain washer	Type	Uls7
	Material	Q235
	Finish	Plain oiled, Oxide black, Zinc plated, Hot dip galvanized, Dacromet, Sherardizing
	Standard refers to	EN10025,EN10139
Plastic dowel	Type	For different size of screw spike
	Material	HDPE	Density: 0.95-0.98g/cm3 Tensile strength: ≥19Mpa Elongation: >80% Melting point: 170-190℃ Insulation resistance: ≥1×1010Ω Hardness:≥98A
	Material	Reinforced Nylon 66 (PA66)	Density:1.3-1.45g/㎝3 Tensile strength: ≥170Mpa Elongation: ≤4.4% Bending Strength: ≥250Mpa Impact Strength(No gap): ≥80KJ/m2 Melting point:250-270℃ Insulation resistance:≥1×108Ω Glass fiber content:30-35% Hardness:≥110HRR
	Color	Black, blue, yellow, green or other color
Guide plate	Type	UIC54,UIC60, 50kg rail, 60kg rail, and size as ordered
	Material	Reinforced Nylon 66 (PA66)	Density:1.3-1.45g/㎝3 Tensile strength: ≥170Mpa Elongation: ≤4.4% Bending Strength: ≥250Mpa Impact Strength(No gap): ≥80KJ/m2 Melting point:250-270℃ Insulation resistance:≥1×108Ω Glass fiber content:30-35% Hardness:≥110HRR
	Color	Black, blue, yellow, green or other color
Rail pad	Type	UIC54,UIC60, and size as ordered
	Material	EVA	Density:0.95-0.98g/㎝3 Tensile strength:≥15Mpa Elongation: >500% Melting point: 170-190℃ Insulation resistance:≥1×1010Ω Hardness: ≥90A
	Material	Rubber	Hardness:75±5A Tensile strength: ≥12.5N/mm² Elongation: ≥250% Operating temperature: -25℃~100℃
	Color	Black, blue, yellow, green or other color